pipe & cable pullers


Super Deluxe Pullers The last puller you'll ever need to buy
		Directional Depot’s new Super Deluxe Pullers are the ultimate expanding duct puller. This rugged puller is quick and easy to install and remove. The Super Deluxe Puller seals on the inside of the product pipe. This keeps the size of the puller to a minimum and makes your pullback that much easier. The Super Deluxe Puller can be disassembled in the field by hand for super easy cleaning and maintenance. This is the last puller you’ll need to buy!


Polly-Puller Extremely durable in rocky conditions
The all new Poly-Puller with the polyurethane nose cone is extremely durable in difficult, rocky conditions. The Poly-Puller features the successful four-jaw clamping system and a one piece eye bolt. Each unit includes a duct plugger on the back that reduces water entry into the duct. This is one durable yet economical puller you simply can’t be without.

		Pictured above is a Poly-Puller that has been in continuous use for well over six months. The user completed over 75 pulls, installing over 25,000 feet of 2" ducting—yet the puller shows minimal wear.

Deluxe Duct Pullers The best for pulling poly or PVC pipe
Directional Depot’s Deluxe Duct Pullers are the best means of pulling in your poly or PVC pipe. This design has many new features including being completely sealed to prevent any fluids from entering either the duct or even the puller itself. The outer sleeve prevents stretching and allows even thin wall duct to be pulled. The precision machined and hardened alloy steel pulling head will handle the abuses of directional drilling. The new Deluxe Duct Puller has a long range of jaw expansion to suit ducting from 1-1/4" to 6" with wall sections from SDR9 to SDR21.
					Metric sized pullers are available

Standard Duct Pullers High quality puller that's easy on your budget
		With Directional Depot’s Duct Pullers you can begin pulling in plastic pipe within minutes. The extra long extension that slides inside the duct provides much more stability than other brands. The large number of teeth results in a much stronger connection. Available for polyethylene and PVC duct from 1-1/4" to 12" with wall sections from SDR11 to SDR17. Pluggers are available to help keep mud out of duct.

Innerduct Pullers Great for small diameter duct and innerduct.
Directional Depot’s Innerduct Pullers are an economical means of pulling small diameter duct and innerduct. Both style Innerduct Pullers are machined from steel and chrome plated for durability. The Lug Style puller is typically used when a direct connection between the innerduct and the swivel is preferred. All Innerduct Pullers have double cutting edges to actually cut a thread into the duct as it is screwed in.

Lug Style Innerduct Puller				Clevis Style Innerduct Puller

Wire Mesh Pulling Grips Double weave galvanized wire
Directional Depot pulling grips are made with a double weave of galvanized wire, with shoulders on each grip. The double weave is made with a return weave design so there are no crimped wire ends at the trailing end of the grip. At least a 2 times safety factor is used on all size pulling grips. This means that the breaking strength of any grip is at least twice that of the heaviest load it will pull.

Shackles
Don’t forget to stock up on shackles to connect the pulling grips and pullers to your swivel. Other sizes available upon request.

Multi-Duct Pulling Slings
			The Multi-Duct Pulling Slings are used to hook up and pull two to six cables or ducts at a time. These high quality slings are constructed of heavy-duty, aircraft quality wire rope.
			Legs are replaceable or can be added.

Multi-Duct Pulling Packer Securely pull multiple ducts
The Multi-Duct Pulling Packer is a simple and secure means of pulling several ducts at one time. It can be used with the Series 00620 or Series 00650 duct pullers, or the series 00604 innerduct pullers. The actual pulling device is protected by a heavy-duty packer housing. This provides a gradual transition from the swivel to the outside diameter of the packer.

Breakaway Connectors Protect your duct from failure
	Breakaway Connectors are designed to protect polyethylene ducting from overload during installation by directional drilling. They should be installed between the pullback swivel and the duct puller. The Breakaway Connectors utilize precision machined and tested pins that are designed to break in tension at a specific load. Between 1 and 5 pins can be used in a variety of combinations to create an enormous number of different break values, all in the same connector body. For example, if a single 1,000 lb. pin is used, the connector will come apart at 1,000 lbs. If 3 pins of the same value are used, the connector would come apart at 3,000 lbs. Available in two sizes: Light-duty from 750 lbs. to 12,000 lbs. Heavy-duty from 3,000 lbs. to 45,000 lbs.