We've detected you are outside the United States. Switch to our International site by clicking below
EagleEye™ Pullback Device | 3.5" Eagle Claw SD
This EagleEye™ Pullback Device is cast to fit the 3-1/2" Eagle Claw SD. FastBack pullback attachments allow you to pull back product without ever taking off the drill head, so within minutes of completing the pilot bore you’ll already be pulling back product.
Product Features
- Made to fit 3.5" Eagle Claw® SDs
- Carbide hardfacing and carbide cutters make these tools tough and long lasting
- Heavy duty construction
- Swivel held in-line with pullback
| Compatible Bolts: FH12 0.3125 x 3.75" |
| Compatible Bit: 3.5" Eagle Claw SD (21M) |
| Rig Model: D6x6, D7x11A, D7x11A S2, D8x12, D9x13, D9x13 S2, D9x13 S3, D10x15, D10x15 S3, JT9, JT10, JT920, JT920L, JT921, JT922 |
-
Catalog Pages | Eagle Claw SD (317.83 KB) - Catalog Pages | The FastBack System (508.00 KB)
- User Instructions | The FastBack System
FREQUENTLY ASKED QUESTIONS
What does the "M" indicate in the part number?
Short Answer: The "M" Indicates a male connection. This is also sometimes referred to as a "pin" connection.
Correct use: "M" connection tooling, or male connections shoud always mate up to a female (F) connection.
Technical details: When configuring tooling connections, be mindful of the gender of the tooling you are connecting to. Connection size and gender are main factors when configuring tooling connections. Avoid excessive adapter use to limit failure points in your drill string.
Replacement Parts
DRILLERS ALSO BOUGHT
