MEET THE

SILVER PULL-IT

Melfred Borzall's patented puller solution for bundled micro-duct installation options.

One Puller. Multiple Configurations.

Silver Pull-it replaces single-application bundled micro-duct pullers with a modular system that adapts to the job—giving crews flexibility, confidence, and cleaner pullback setups across changing bundle configurations.

MIXED GROUND | MALIBU, CALIFORNIA

“It was taking us about 30 minutes or more to completely transition our setup from the pilot shot to backreaming. With the Tri-Con System, we did it in about 7 minutes. ”

Danny Alvarado, Ventura Directional Drilling

SILVER PULL-IT

PULLER BODIES

Our SILVER PULL-IT bodies can accept spacer inserts, but also natively fit popular bundle sizes without spacers. Puller sizes include:

3.00" diameter puller (7-way options)
3.25" diameter puller (15-way)
4.25" diameter puller (6-way options)
5.00" diameter puller (6-way)

SHOP PULLER BODIES

MORE OPTIONS WITH

SPACER INSERTS

Expand each of the puller's abilities to accept more than one micro-duct configuration with our patented inserts.

Made from tested and tensile-tough carbon material
18+ multi-duct size options when using inserts + pullers
Insert with your hands - no specialty tools necessary

SHOP SPACER INSERTS

PATENTED SECURE

CONNECTION

This unique cross-hatch connection of stainless steel screws is uncomplicated & effective.

Puller Bodies come with replacement screws that match the puller style
Each puller body also comes equipped with a standard 3/8" drive chuck
No specialty tooling needed, just a standard drill
Replacement parts are easily found on the puller body. product page

CHECK OUT THE HOUSING

Spend less production dollars on specialty pullers for each different multi-duct installation. With a single puller you can pull up to 8 different sizes with inserts.

Tired of sifting through the cargo bay, looking for just the right specialty puller? Reduce the number of pullers by 80% with the Silver Pull-it.

when does it

make sense

to SWITCH?

We are excited for you to try the Tri-Con System, which can increase your jobsite productivity.

We also believe that using the right tool is best for productivity, safety, and overall better drilling practices. That is why we've put together a table below to help you decide when your job or drilling technique may indicate that the time is right to switch to the tri-con system.

	Standard Connection	Switch to Tri-Con
I need a more faster connection than standard threaded connection
I'm breaking or jamming pins with my spline connection's stress concentrations
I need to find ways to increase my production and decrease time in the pit
My threaded housing is worn out and I am ready to transition to a faster connection type
I need to frequently ream larger 12" diameter holes and larger
I'm looking for an end-load housing solution for my transmitter
I only run a 30,000 lbs class rig and greater for my jobs

Do I Need A Spacer Insert?

Silver Pull-it Spacer Selector

This selector is for choosing the right puller & spacer insert for your bundled micro-duct.

(1) Select your Body, then (2) select the micro-duct bundle your wish to pull. The selector will recommended spacer insert part number (or confirm that no spacer is required).

What Silver Pull-it body do you have?

Specs at a glance

Select a body to preview.

What bundle configuration do you need to pull?

Don’t see your configuration? Check the compatibility table below, or contact us for new size requests or availability options.

Silver Pull-It Configurations

Silver Pull-it Body* (Part #)	Puller Diameter	Compatible Spacer (Part #)	Final Desired Configuration
MDP-15W	3.25"	N/A	15-way (4) 16/12 mm and (11) 14/10 mm
MDP-6W-18/14-3.35	4.25"	N/A	Hybrid 6-Way 1 1/4" TSIDR 11.5 + 18/14 mm
		N/A	Jumbo 3-Way 1 1/4" TRUE SIDR 11.5
		MDP-10W-18/14-SPACER	10-way 18/14 mm
MDP-6W-18/14-4.23	5"	N/A	Hybrid 6-Way - 1 1/2" SDR 11 + 18/14 mm
		N/A	Hybrid 6-Way - 1 1/2" SDR 11 + 22/16 mm
		MDP-6W-SDR11-18/14-SPACER	6-way 18/14 mm (SDR 11)
MDP-7W-18/14	3"	N/A	7-way 18/14 mm
		MDP-3W-18/14-SPACER	3-way 18/14 mm
		MDP-4W-18/14-SPACER	4-way 18/14 mm
		MDP-4W-16/12-SPACER	4-way 16/12 mm
		MDP-4W-12.7/10-SPACER	4-way 12.7/10 mm
		MDP-4W-14/10-SPACER	4-way 14/10 mm
		MDP-7W-14/10-SPACER	7-way 14/10 mm
		MDP-7W-16/13-SPACER	7-way 16/13 mm
MDP-7W-14/10	3"	N/A	7-way 14/10 mm
		MDP-2W-18/14-SPACER	2-way 18/14 mm
		MDP-2W-14/10-SPACER	2-way 14/10 mm
*Puller body purchases include a 3/8" Socket & Hex Shank Drive Adapter.

ONE-TAKE SOCIAL PROOF

Watch Ricky, our engineer, easily assemble the SILVER PULL-IT without any movie-editing magic. This is a "one-take-wonder" video to prove that it is just that easy to assemble and disassemble.