We've detected you are outside the United States. Switch to our International site by clicking below
5-1/2" Red Diamond | 6 x 16mm Bolt Pattern
The Red Diamond Blade with a 5-1/2" blade width and 6 x 16mm bolt pattern slices through cemented cobble, hard packed soils and softer shales. Keep a firm grip on the job with an aggressive tapered bit-front and contoured steel surface featuring chunky carbide wear. Now available with dome carbides for blazing through those cobbles without missing a beat. increases drilling efficiency, but also addresses everyday production-draining issues such as blade drag, carbide wear and pullback efficiency. The Red Diamond Blade design is tougher and smarter.
Product Features
- 5.5" blade width
- 6 x 16mm bolt pattern
- Durable Domed Front Carbide
- Diamond-shaped carbides on sides for aggressive cutting —100% carbide coverage
- Continuous low-profile back carbides to minimize wear
- Tapered design towards the rear to reduce drag
| For Use In: Caliche, Cobbles, Dirt, Gravel, Hardpan, Sand, Sandstone, Shale |
| Rig Model: JT25, JT30, JT30 AT, JT2720, JT2720 M1, JT2720 AT, JT3020, JT3020 AT |
| Housing Type: Bolt-on, Side-load |
| Transmitter Housing Front Thread: N/A |
| Bit / Blade Option: Pit Bull™ & Standard Blade Compatible |