We've detected you are outside the United States. Switch to our International site by clicking below
3" SteepTaper UltraBit (with bend) | 12x20mm 3-Bolt
The SteepTaper UltraBit has a 3" blade width slices through cemented cobble, hard packed soils and softer shales. Keep a firm grip on the job with an aggressive tapered bit-front and contoured steel surface featuring chunky carbide wear. Now available with dome carbides for blazing through those cobbles without missing a beat.
Product Features
- 3" blade width
- bent blade design
- Center point tooth for easier penetration
- Carbide cutter blocks set at an aggressive angle to get through cobbles
- Weld bead is reinforced with hardfacing to increase bit life
- Chunky carbide hardfacing the entire length of blade for maximum tool life
- Low-profile, tapered design to minimize torque-stealing drag
| For Use In: Clay, Dirt, Hardpan, Sandstone, Shale |
| Compatible Housings: 1720-HM-09, 1920-HD-09 |
| Blade Bolts: SHCS 12MM x 20MM |
| Compatible Bolts: SHCS 12MM x 20MM |
| Blade Cutter Option: Aggressive |
| Housing Type: Bolt-on, Side-load |
| Bit / Blade Option: Standard Blade (Non-Pit Bull™) Compatible |
| Carbide Teeth Option: Conical Aggressive |
-
Catalog Pages | Steep Taper UltraBit (239.17 KB)