We've detected you are outside the United States. Switch to our International site by clicking below
4" Bear Claw | 6 x 1/2" Bolt Pattern
This burly blade uses large conical carbide cutters to eat through caliche, sandstone and other tough conditions. Our rugged design and engineering make the Bear Claw one of the fiercest blades on the market.
Product Features
- 4" blade width
- Vermeer® Compatible 6 x 1/2" bolt pattern
- Hardfacing along all wear edges for endurance
- Large conical carbide cutters eat through tough conditions
| For Use In: Caliche, Cobbles, Dirt, Gravel, Sand, Sandstone, Shale |
| Rig Model: D6x6, D7x11A, D7x11A S2, D8x12, D9x13, D9x13 S2, D9x13 S3, D10x15, D10x15 S3, D16x20, D16x20 S2, D18x22, D20x22 S2, D20x22 S3, D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D36x50DR S2, D40x40, D40x55 S3, D40x55DR S3 |
| Housing Type: Bolt-on, Side-load |
| Bit / Blade Option: Standard Blade (Non-Pit Bull™) Compatible |
-
Catalog Pages | Bear Claw & Excalibur (238.30 KB)