We've detected you are outside the United States. Switch to our International site by clicking below
4" SteepTaper UltraBit w/Dome Carbides | 6 x 35mm Bolt Pattern
This 1" thick SteepTaper UltraBit with a 4" blade width, dome carbides, and 6 x 16mm bolt pattern slices through cemented cobble, hard packed soils and softer shales. Keep a firm grip on the job with an aggressive tapered bit-front and contoured steel surface featuring chunky carbide wear. Now available with dome carbides for blazing through those cobbles without missing a beat.
Product Features
- 4" blade width
- Integrated dome carbides
- 6 x 16mm bolt pattern
- Center point tooth for easier penetration
- Carbide cutter blocks set at an aggressive angle to get through cobbles
- Weld bead is reinforced with hardfacing to increase bit life
- Chunky carbide hardfacing the entire length of blade for maximum tool life
- Low-profile, tapered design to minimize torque-stealing drag
| For Use In: Caliche, Cobbles, Gravel, Hardpan, Sandstone, Shale |
| Blade Cutter Option: Dome |
| Rig Model: JT25, JT30, JT30 AT, JT2720, JT2720 M1, JT2720 AT, JT3020, JT3020 AT |
| Housing Type: Bolt-on, Side-load |
| Bit / Blade Option: Pit Bull™ & Standard Blade Compatible |
| Carbide Teeth Option: Dome |