We've detected you are outside the United States. Switch to our International site by clicking below
5" Iron Fist w/Conical Cutters | 2-3/8" Reg
The Iron Fist Bit with a 5" cutting diameter and conical cutters packs a major punch in cobble and loose rock conditions and is designed to be easily and inexpensively be rebuilt, which reduces your tooling costs. Bam.
Product Features
- Main carbide cutters positioned to allow for “rocking” the bit through rocks
- Compact cutters are less likely to hang up on cobbles
- Balanced cutters for downhole stability
- Contoured design
- 1/4-inch recessed water holes to prevent clogging
- Built-in check valve to minimize chance of clogging
- Wrench flats for easy removal
| Iron Fist Cutter Block Type: Conical |
| For Use In: Caliche, Clay, Cobbles, Dirt, Gravel, Hardpan, Sand, Sandstone, Shale |
| Bit Connection: 2-3/8" REG |
| Rig Model: D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D36x50DR S2, D40x40, D40x55 S3, D40x55DR S3, JT25, JT30, JT30 AT, JT40, JT40 AT, JT2720, JT2720 M1, JT2720 AT, JT3020, JT3020 AT, JT4020, JT4020 M1, JT4020 AT, DD4, DD2226, DD3238, DD4045, DD4050 |
| Housing Type: Thread-on, Side-load |
| Transmitter Housing Front Connection: 2-3/8" REG |
| Carbide Teeth Option: Conical |
-
Catalog Pages | Iron Fist Bit (711.24 KB)
Replacement Parts
