We've detected you are outside the United States. Switch to our International site by clicking below
6" SteepTaper UltraBit | 1" thick | 6 x 20mm Bolt Pattern
The SteepTaper UltraBit with a 6" blade width, 1" blade thickness and 6 x 20mm bolt pattern slices through cemented cobble, hard packed soils and softer shales. Keep a firm grip on the job with an aggressive tapered bit-front and contoured steel surface featuring chunky carbide wear. Now available with dome carbides for blazing through those cobbles without missing a beat.
Product Features
- 6" blade width
- 1" blade thickness
- 6 x 20mm bolt pattern
- Center point tooth for easier penetration
- Carbide cutter blocks set at an aggressive angle to get through cobbles
- Weld bead is reinforced with hardfacing to increase bit life
- Chunky carbide hardfacing the entire length of blade for maximum tool life
- Low-profile, tapered design to minimize torque-stealing drag
| For Use In: Caliche, Cobbles, Gravel, Hardpan, Sandstone, Shale |
| Blade Cutter Option: Aggressive |
| Rig Model: JT40, JT40 AT, JT60, JT60 AT, JT100 M1, JT100 AT, JT4020, JT4020 M1, JT4020 AT, JT7020, JT7020 M1, JT8020 M1 |
| Housing Type: Bolt-on, Side-load |
| Bit / Blade Option: Standard Blade (Non-Pit Bull™) Compatible |
-
Catalog Pages | Steep Taper UltraBit (239.17 KB)