We've detected you are outside the United States. Switch to our International site by clicking below
4" SteepTaper UltraBit w/Dome Carbides | 5 x 12mm Bolt Pattern
The SteepTaper UltraBit with a 4" blade width, dome carbides, and 5 x 12mm bolt pattern slices through cemented cobble, hard packed soils and softer shales. Keep a firm grip on the job with an aggressive tapered bit-front and contoured steel surface featuring chunky carbide wear. Now available with dome carbides for blazing through those cobbles without missing a beat.
Product Features
- 4" blade width
- Integrated dome carbides
- 5 x 12mm bolt pattern
- Center point tooth for easier penetration
- Carbide cutter blocks set at an aggressive angle to get through cobbles
- Weld bead is reinforced with hardfacing to increase bit life
- Chunky carbide hardfacing the entire length of blade for maximum tool life
- Low-profile, tapered design to minimize torque-stealing drag
| For Use In: Caliche, Cobbles, Gravel, Hardpan, Sandstone, Shale |
| Blade Cutter Option: Dome |
| Rig Model: JT9, JT10, JT20, JT24, JT920, JT920L, JT921, JT922, JT1220 M1, JT1720, JT1720 M1, JT2020 |
| Housing Type: Bolt-on, Side-load |
| Bit / Blade Option: Pit Bull™ & Standard Blade Compatible |
| Carbide Teeth Option: Dome |
FRED RECOMMENDED UPGRADE
