We've detected you are outside the United States. Switch to our International site by clicking below
Adapter | 2-3/8"API Reg x Tri-Con™ Connection (77M)
| Adapter Gender (Side 1): Pin |
| Adapter Thread (Side 1): 2-5/8" Tri-Con (Pin) |
| Adapter Gender (Side 2): Pin |
| Adapter Thread (Side 2): 2-3/8" Reg |
| Compatible Housings: 5632-HT4, 5932-HD4 |
| Rig Model: JT28, JT32, D6x6, D7x11, D7x11A, D7x11A S2, D8x12, D9x12, D9x13, D9x13 S2, D9x13 S3, D10x15, D10x15 S3, D16x20, D16x20 S2, D18x22, D20x22 S2, D20x22 S3, D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, JT5, JT9, JT10, JT20, JT20 XP, JT24, JT25, JT30 |
-
Tri-Con Brochure (2.37 MB) - Catalog Pages | Tri-Con System (2025) (431.86 KB)
FREQUENTLY ASKED QUESTIONS
Short Answer: Replace as soon as you see any signs of wear or mushrooming. This can be as frequent as each shot, depending on jobsite conditions. Consult the user manual.
Correct use: Before and after each bore, inspect the coiled pins, and mating components for wear or deformation. Keep all contact surfaces clean, apply light grease where applicable, and replace pins that show wear to maintain smooth rotation and fast tool changes
Technical details: Coiled pins are designed to protect the Tri-Con connection by absorbing wear during operation. They are purposefully a wear-item to protect the integrity of the Tri-Con Connection.
Incorrect use includes: Reusing damaged or worn pins or allowing debris to build up in the connection. Incorrect use can introduce greater risk of poor fit, difficult tool changes, or reduced connection performance.
