We've detected you are outside the United States. Switch to our International site by clicking below
3-1/2" IF x EYE840 (Pin/Eye)
This Thread-in Pulling eye's configuration is 3-1/2" IF x EYE840 (Pin/Eye) and is a standard-stock HDD Adapter that enables the right connection for your tooling setup.
Product Features
- Pulling Eyes that connect directly to your tooling
- Allows you to thread into the back of the reamer for direct connection to a swivel or shackle for pullback
- Try the MudBoost™ Version of this adapter for increased mud flow with pullback
| Reamer Rear Thread: 3-1/2" IF |
| Adapter Type: Threaded Pulling Eye |
| Adapter Gender (Side 1): Pin |
| Adapter Thread (Side 1): 3-1/2" IF |
| Adapter Gender (Side 2): Eye |
| Adapter Thread (Side 2): EYE840 |
| Swivel Capacity: 30 ton (60,000 lbs) |
| Rig Model: D6x6, D7x11, D7x11A, D7x11A S2, D8x12, D9x12, D9x13, D9x13 S2, D9x13 S3, D10x15, D10x15 S3, D16x20, D16x20 S2, D18x22, D20x22 S2, D20x22 S3, D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D36x50DR S2, D40x40, D40x55, D40x55 S3, D40x55DR S3, D50x100, D60x90, D60x90 S3, D80x100, D80x100 S2, D80x120, D100x120, D100x120 S2, D100x140, D100x140 S3, D220x300, D220x300 S3, JT5, JT9, JT10, JT20, JT20 XP, JT24, JT25, JT30, JT30 AT, JT40 |
-
Stock Adapter Reference Chart (76.62 KB)