We've detected you are outside the United States. Switch to our International site by clicking below
2-1/4" UN x EYE310 (Pin/Eye)
This Thread-in Pulling eye is custom designed to fit a 4 or 6" Juggernaut Reamer. The thread is 2-1/4" UN x EYE310 (Pin/Eye). This is a standard-stock HDD Adapter we carry in inventory and is not a custom adapter.
Product Features
- Pulling Eyes that connect directly to your tooling
- Allows you to thread into the back of the reamer for direct connection to a swivel or shackle for pullback
- Try the MudBoost™ Version of this adapter for increased mud flow with pullback
| Reamer Rear Thread: 2-1/4"-12 |
| Adapter Type: Threaded Pulling Eye |
| Adapter Gender (Side 1): Pin |
| Adapter Thread (Side 1): 2-1/4" UN |
| Adapter Gender (Side 2): Eye |
| Adapter Thread (Side 2): EYE310 |
| Swivel Capacity: 10 ton (20,000 lbs) |
| Rig Model: D23x30 DR S3, D36x50 DR S2, D40x55 DR S3, JT28, JT32, JT60AT, D16x20, D16x20 S2, D18x22, D20x22 S2, D20x22 S3, D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D40x40, D40x55 S3, D50x100, D60x90, D60x90 S3, D80x100, D80x100 S2, D80x120, JT20, JT24, JT25, JT30, JT30 AT, JT40, JT40 AT, JT60, JT1220 M1, JT1720, JT1720 M1, JT2720, JT2020, JT2720 M1, JT2720 AT, JT3020, JT3020 AT, JT4020, JT4020 M1, JT4020 AT, JT7020, JT7020 M1, JT8020 M1, DD4, DD5, DD6, DD8, DD2024, DD2226, DD3238, DD4045, DD4050 |
-
Stock Adapter Reference Chart (76.62 KB)