We've detected you are outside the United States. Switch to our International site by clicking below
10" Ogre | 2-3/8" Reg Shaft | Rear Flange
This Ogre Reamer has a 10" cutting diameter and a connection type of 2-3/8" Reg Box/Box. Ogre chews ‘em up and spits ‘em out. Packed with carbide cutters, Ogre is unquestionably the best reamer on the market for faster, smoother cutting and unsurpassed durability in hard rock conditions.
Product Features
- Now available with built-in pulling swivels
- Ideal for cobbles, shale, river rock, glacial til and hardpan
- More cutters than any other reamer in its class
- Carbide blocks prevent shaft from wearing directly in front of reamer body
- Each cutter takes off only 1/4″ more soil than previous stage resulting in a smooth, efficient cutting action
- Slow taper and deep spiraled fluting combine to give the Ogre maximum mixing and pumping
- Angled fluid jets shoot water opposite the reamer rotation to keep carbides clear of debris
- Hardfacing on all wear areas
- Curved, hard-faced back-up blades for added wear resistance during pushbacks
- Deep flutes carry away cuttings
| For Use In: Caliche, Cobbles, Dirt, Gravel, Hardpan, Sand, Sandstone, Shale |
| Reamer Front Thread: 2-3/8" REG |
| Reamer Shaft Size: 3.25" with 2-3/8" REG box |
| Rig Model: JT60AT, D50x100, D60x90, D60x90 S3, D80x100, D80x100 S2, JT60, JT100 M1, JT100 AT, JT7020, JT7020 M1, JT8020 M1 |
| Reamer Rear Thread: 2-3/8"REG |
| Reamer Packing Size: 8.625" |
| Reamer Rear Connection Option: Flange for 10-ton or 15-ton Valu-DUB Swivel |
| Reamer Rear Connection Option: Thread-in Swivel, Pulling Eye |
-
Catalog Pages | Ogre Reamers (453.06 KB)