We've detected you are outside the United States. Switch to our International site by clicking below
18" Ogre | 2-3/8" Reg Shaft
This Ogre Reamer has a 18" cutting diameter and a connection type of 2-3/8" Reg Box/Box. Ogre chews ‘em up and spits ‘em out. Packed with carbide cutters, Ogre is unquestionably the best reamer on the market for faster, smoother cutting and unsurpassed durability in hard rock conditions.
Product Features
- Now available with built-in pulling swivels
- Ideal for cobbles, shale, river rock, glacial til and hardpan
- More cutters than any other reamer in its class
- Carbide blocks prevent shaft from wearing directly in front of reamer body
- Each cutter takes off only 1/4″ more soil than previous stage resulting in a smooth, efficient cutting action
- Slow taper and deep spiraled fluting combine to give the Ogre maximum mixing and pumping
- Angled fluid jets shoot water opposite the reamer rotation to keep carbides clear of debris
- Hardfacing on all wear areas
- Curved, hard-faced back-up blades for added wear resistance during pushbacks
- Deep flutes carry away cuttings
| For Use In: Caliche, Cobbles, Dirt, Gravel, Hardpan, Sand, Sandstone, Shale |
| Reamer Front Thread: 2-3/8" REG |
| Reamer Shaft Size: 3.25" with 2-3/8" REG box |
| Rig Model: D23x30 DR S3, D36x50 DR S2, D40x55 DR S3, JT28, JT32, D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D40x40, D40x55 S3, JT24, JT25, JT30, JT30 AT, JT40, JT40 AT, JT2720, JT2720 M1, JT2720 AT, JT3020, JT3020 AT, JT4020, JT4020 M1, JT4020 AT |
| Reamer Rear Thread: 2-3/8"REG |
| Reamer Packing Size: 16" |
| Reamer Rear Connection Option: Rear Shaft Thread Box |
| Reamer Rear Connection Option: Thread-in Swivel, Pulling Eye |
-
Catalog Pages | Ogre Reamers (453.06 KB)