We've detected you are outside the United States. Switch to our International site by clicking below
10" FastReam Cutter Block | 2-1/2" Housings
This FastReam® cutter block has a 10" cut diameter and fits to a 2-1/2" transmitter housing. All cutter blocks work with the FastReam® housing to cut up to 12” diameter for direct pullbacks.
Product Features
- 10" cutting diameter
- Made to fit your 2.5" FastReam® transmitter housing
- FastReam® cutter blocks designed after our best selling reamer, the Tornado®
- Get through tough conditions while providing much-needed mixing and pumping action
| Transmitter Housing Diameter: 2-1/2" |
| Rig Model: D6x6, D7x11A, D7x11A S2, D8x12, D9x13, D9x13 S2, D9x13 S3, D10x15, D10x15 S3, JT9, JT10, JT920, JT920L, JT921, JT922, 4X |
Catalog Pages | The FastBack SystemFREQUENTLY ASKED QUESTIONS
What does the "M" indicate in the part number?
Short Answer: The "M" Indicates a male connection. This is also sometimes referred to as a "pin" connection.
Correct use: "M" connection tooling, or male connections shoud always mate up to a female (F) connection.
Technical details: When configuring tooling connections, be mindful of the gender of the tooling you are connecting to. Connection size and gender are main factors when configuring tooling connections. Avoid excessive adapter use to limit failure points in your drill string.
Replacement Parts
