We've detected you are outside the United States. Switch to our International site by clicking below
12" FastReam Cutter Block | 3-1/4" Housings
This FastReam® cutter block has a 12" cut diameter and fits to a 3.25" transmitter housing. All cutter blocks work with the FastReam® housing to cut up to 12” diameter for direct pullbacks.
Product Features
- 12" cutting diameter
- Made to fit your 3.25" FastReam® transmitter housing
- FastReam® cutter blocks designed after our best selling reamer, the Tornado®
- Get through tough conditions while providing much-needed mixing and pumping action
| Transmitter Housing Diameter: 3-1/4" |
| Rig Model: D23x30 S3, D24x26, D24x33, D24x40, D24x40A, D24x40 S2, D24x40 S3, D33x44, D36x50, D36x50 S3, D36x50DR S2, D40x40, D40x55 S3, D40x55DR S3, JT25, JT30, JT30 AT, JT40, JT40 AT, JT2720, JT2720 M1, JT2720 AT, JT3020, JT3020 AT, JT4020, JT4020 M1, JT4020 AT, DD4, DD2226, DD3238, DD4045, DD4050 |
Catalog Pages | The FastBack SystemFREQUENTLY ASKED QUESTIONS
What does the "M" indicate in the part number?
Short Answer: The "M" Indicates a male connection. This is also sometimes referred to as a "pin" connection.
Correct use: "M" connection tooling, or male connections shoud always mate up to a female (F) connection.
Technical details: When configuring tooling connections, be mindful of the gender of the tooling you are connecting to. Connection size and gender are main factors when configuring tooling connections. Avoid excessive adapter use to limit failure points in your drill string.
Replacement Parts
DRILLERS ALSO BOUGHT